欢迎来到山东蕴达金属制品有限公司!   您有5条询价信息! 关于我们 联系我们 网站地图
全国咨询热线:
18963095832
联系我们
咨询热线:

18963095832
山东蕴达金属制品有限公司
电   话:18963095832
E-MAIL:425893602@qq.com
地   址:济南市商河县孙集镇工业园
首页 > 新闻动态 > 济南喷塑加工厂
济南喷塑加工厂
责任编辑: 人气:4641 发表时间:2019/10/04

济南喷塑装备在此刻的工业中已经使用的很是的遍及,他首要用于大型的机械喷涂,是比力利便的喷漆装备。有时我们会碰到济南喷塑装备不喷油的环境,今天我们就来看一下这种征象发生的缘故原由。

查抄油泵有无打油,气压及油压阀是否调到必然压力,油路有无堵塞及洗濯。喷枪启枪开关是否够高,按启动喷枪顶针有无弹起;若还不出油,洗濯喷枪内部及枪帽,注重喷枪油封不能浸到甲苯等腐化性液体,以防变形损坏。

在使用济南喷塑装备的时辰可能会呈现一些不测的小状态,实在只要把握了这些妨碍的查抄解除要领,我们完全可以本身解决这些问题。

Jinan Spraying Equipment has been used throughout the industry at this time. He is mainly used for large-scale mechanical spraying and is a spray paint equipment for Bili. Sometimes we will encounter JiNan spray equipment do not spray oil environment, today we look at the reasons for this kind of symptoms.
Check whether the pump is filled with oil, whether the pressure and oil pressure valve are adjusted to the inevitable pressure, whether the oil road is blocked and washed. Whether the gun trigger switch is high enough, press the start gun thimble whether or not it is loaded; If there is no oil, wash the inside of the gun and gun cap, pay attention to the gun oil seal can not be immersed in toluene and other corrosive liquids to prevent deformation and damage.
In the use of Jinan spray plastic equipment may appear some of the small state of eventuality, so long as we grasp these obstacles to the inspection and release of the key, we can completely solve these problems themselves.



上一篇:印染污水处理设备2016年趋势分析                                         下一篇:如何提高静电喷塑的效率

山东蕴达金属制品有限公司  版权所有 山东蕴达金属制品有限公司
地 址:济南市商河县孙集镇工业园
联系人:王经理
电话:18963095832
网址:www.jnkangyuan.com
网站备案号:鲁ICP备14017671-1 - 静电喷涂   喷漆处理   粉末喷涂   喷塑护栏